QUALITY

Quality of setta

Sango Town, Nara Prefecture is an agglomeration of setta manufacturing with a history of over 100 years.
We propose a design that is close to the modern lifestyle by combining new ideas and materials with skilled craftsmanship based on the traditional techniques of the local industry.

Name of each part of kimono footwear

Difference from conventional setta

DESIGN SETTA SANGO's setta is
It can only be produced about 1/10 of the conventional setta It is made with advanced technology and labor.
It is a new setta that adds value to the technology with a new design and ideas.

① Thong (Hanao) HANAO

	Traditional setta	DESIGN SETTA SANGO
Shape	Thin and hard. It hurts when it hits your foot, and the shape is hard to get used to.	Rounded and thick. It contains 4 layers of cushion material, cotton , and fits the shape of the wearer. This technique can only be done by skilled hanao craftsmen in Misato.
Fabric	There are many Japanese patterns, and the part that touches the foot that cannot be seen from above may be spliced ​​with different fabrics.	Uses European vintage fabrics and collaboration fabrics with Japanese textile artists. For a design that is easy to match with jeans and skirts. Because it is finished with one piece of fabric, it is cute from any angle at 360 ° C.

② Heaven TEN

	Traditional setta	DESIGN SETTA SANGO
Shape	Many of them are square and elongated, and the little finger may stick out for people with wide widths.	Make your own mold. The original design of the bale-shaped round shape that allows you to take a firm width. It does not use bias (border removal) and finishes directly on the bottom, which requires more advanced technology "Tenmaki" .
Material	Tatami-style rushes, PP-pasted ones for Nakai-san at the inn, aquatic plants, etc.	Adopts jute and Panama-style PP used for hemp bags of coffee beans. It absorbs sweat and has excellent breathability. With two layers of cushions, soft and flexible, the fluffy comfort feels good. Technology that only skilled craftsmen can do in Misato.

③ Bottom (there) SOKO

	Traditional setta	DESIGN SETTA SANGO
Shape	Mostly flat.	Thick, curved line. It is warped by craftsmen in the process of pasting the heavens and the bottom. The back side has a logo mark.
Material	It was leather-covered and thin, and it was said that it was smart to put an iron stud in the heel and click it with a rubbing foot.	The original EVA is used , and you can wear it as if you were wearing shoes. It is also environmentally friendly because it is a sole company that also handles toys for children in Gose City, Nara Prefecture.
Usage	Mainly for men or kimono, only for outside wear.	Can be used as room shoes as well as outside shoes. A bottom that does not lose to asphalt and does not damage the flooring. Casual style for men and women of all ages.

④ Maetsubo MAETSUBO

	Traditional setta	DESIGN SETTA SANGO
How to sew	Mass-produced sewing machines will have a straight and hard finish. This causes pain.	Made by hand sewing. Because it is made by a skilled craftsman until the end, it can be soft even though it is elastic. As you wear it, Maetsubo stands up in the shape of the person's feet.